Do you want to know about Smart Home? — Learn from my experiences.
A short time after discovering these robots, I became aware of Amazon’s Alexa. In mid-2016, I decided that I would need to understand Smart Home technology to accomplish my goals, so I began acquiring Smart Home devices.
My acquisition strategy was only to acquire devices that would provide a benefit in my home (not just to test) and, if controllable, and they must integrate with Alexa. As of the latest update of this article, I have the following devices:
- 5 Amazon Alexa devices plus a Google Home (6 total)
- 22 smart or controlled light bulbs
- 11 smart outlets
- 10 sensors (6 water leak, 2 motion, 1 door, 1 multipurpose)
- 3 smart smoke/CO2 detectors
- 2 entertainment devices
- 2 cameras
- 1 garage door control
- 1 WiFi thermostat
That’s a total of 58. There are two other devices (the last ones below) that help keep my home WiFi network running smoothly. Below I’ll first reference each unique device and briefly describe my usage.
Quite a few of the devices I bought have had newer models introduced, sometimes more than one generation, and this will only continue. All my stuff still works, but I can foresee needing to replace some of them as time goes on.
The website’s forum is a place for members to add their own stories. Also, if you have a story you’d like to share and appear as an article on the website with you as the author, let me know via the Contact form.
I have also provided stories of my Smart Home journey, including more detail about the devices than contained here. The stories are not entirely sequential. Some refer to changes in how the devices are used that happened after first installed.
The stories will mention problems, issues, and considerations experienced and learned from my (first) three years with Smart Home technology. I have also expanded on this in my free eBook.
The more devices you have, the more likely you will encounter some of these problems and issues, although I experienced my first problem with basically one device (WiFi outlet). Many of these issues are related to the networks used by Smart Home devices – WiFi, Zigbee, Z-Wave.
Even with the problems and issues, I believe that implementing all this has improved our quality of life.
My 58 Smart Home devices
NOTE: Links for devices below could result in an affiliate commission to TechForAging, and do not imply endorsement or recommendation. Use of these links when making your purchases helps to keep the content of this website free. TechForAging is a member of the Amazon Associates Program and an affiliate of other vendors.
The Dot was my first purchase after my decision to begin this journey. As I have acquired more Alexa devices, this now resides in our vacation home. Mine is the first generation Echo Dot.
A third generation variant with a LED display was introduced with first availability of 10/16/19. The display can show the time, outdoor temperature, or timers.
The Tap was on deep discount during the 2016 Amazon Prime Day, so I had to buy it. It resides in our bedroom. My wife used to listen to NPR in the morning on it.
As it is portable, and I like listening to music while showering, I take it into the bathroom in the morning, and occasionally into the garage or a patio.
I like that I have the option of touch for frequent voice commands – Alexa, stop, skip, louder, lower.
It is no longer available new, only refurbished, or on eBay. For some other Echo devices there are accessory battery attachments for portability.
A few days after ordering the Tap on Prime Day, there was an Amazon Lightning Deal offering the original Echo at deep discount, so I bought that too.
It had been used for almost two years in our kitchen, but now resides in our vacation home in addition to the Dot.
The third generation Echo (pictured) is the same as the Plus model, but without the Zigbee hub. It was introduced with first availability of 10/16/19.
Another of Amazon’s fall 2019 introductions, the Echo Studio, with first availability of 11/7/19, is apparently a competitive response to Apple’s HomePod. It offers higher quality sound at a somewhat lower price.
I had purchased the Tap and Echo with the thought of installing one of them at the residence of my then 100-year-old mother-in-law. That did not happen. But when the Echo Show was introduced a year later (mid-2017), I immediately ordered two and did install one for her. The other went into our kitchen.
When she passed away in February 2018 (a few months short of her 102nd birthday) her unit replaced the Echo in my office. Amazon’s significant Alexa introductions on 9/20/18 included a major update, the second generation appearing to be in reaction to Google’s competitive offering.
Amazon has subsequently added three more Smart Display devices:
That special deal from Google (but for some reason via eBay) was in mid 2017. Since then, competing strongly with Amazon, Google has introduced these smart speakers and smart displays (branding has been changing by integrating Nest products):
Smart Home Hub
Most, but not all, of my devices integrate with the SmartThings Hub. I chose it for a number of reasons which I explained in a story and further in the free eBook section about Hubs.
In 2018, Samsung released a new version 3 (mine is version 2). Both are currently sold and there are two significant differences. Version 3 allows the router connection to use Wi-Fi while version 2 uses a wired connection. This provides flexibility for the placement of the hub.
The second difference is in the customization capability. Samsung supports a large number of devices from many vendors in both versions, but version 2 includes customization capabilities for more tech savvy individuals that are not available in version 3. A community of developers significantly expands the possibilities with version 2.
The Phillips Hue lighting system is very popular generally consisting of a hub and one or more Hue bulbs. We use 5 of them in floor cans in a few rooms.
The Phillips Hue system does not include a wall switch to control non-Hue bulbs. This replaced a dimmer switch controlling 6 ceiling lights in our kitchen. NOTE: The links are to the unit I purchased, but it is no longer available from Leviton. Click here for the link to the upgraded replacement model.
I obtained these lower cost products to add smarts to switches for two outdoor lamps. They are included in a routine to turn them on at sunset and off at 11:00 pm.
This bulb is in an overhead fixture in our master bedroom’s walk-in closet. It is paired with a motion sensor which turns the bulb on as we enter and off automatically after five minutes of no motion detected.
This inexpensive bulb is installed in a “can” within our coat closet and controlled by the Door Sensor.
This bulb is in a cheap desktop lamp on a workbench in the garage.
We have 8 of these in our vacation home. I no longer need to go up the stairs to turn some of them on at night and automatically turn them off if I forget.
This outlet is now located close to our router providing control for a lighted display cabinet/hutch.
This smart outlet provides power to a recirculation pump attached to our water heater. It allows the pump to be turned on and off via a program or at will.
NOTE: The links are to the unit I purchased, but it is no longer available. Click here for the link to the upgraded replacement model which has a different shape.
SmartThings replaced the Zigbee Outlet above with a new model. The old one was sourced from Centralite and I wanted a second matching one, so I got this.
It connects to two dumb LED flood lights in our garage. The outlet switches on triggered by the door open/close sensor (below) upon detecting an open and turns off five minutes after a door close.
This outlet was originally being used with a single serve coffee machine without an auto shutoff. Its width resulted in its covering an adjacent outlet, but as it has both a controlled and non-controlled outlets. It was set up to shut the power off five minutes after it turns on the power, either manually or via an Alexa command.
That coffee machine was replaced (and relocated to the vacation home) by a new one with auto shutoff. The GE Zigbee Outlet was relocated to work with a floor lamp.
I got this product for its lower price then the other Zigbee outlets I had previously gotten. But this required a bit of tech know-how to get working with our SmartThings hub – I had researched that prior to purchasing.
One is used with an electric towel heater that previously had been powered 24 x 7 x 365. A second one is used for holiday lighting but is left plugged in to improve the Zigbee network in my home.
Like the one above, I got this product for its lower price but also for a known brand name. I have two. There were different experiences installing (with SmartThings) the first and second, with a long time between.
The first required the same tech know-how. It is used as a one-hour auto shutoff for use with my wife’s personal care appliances, in particular, a hair curler. The second installed as a supported device and is used to light a lamp after dark if we’re not home.
This is the same as the GE Zigbee Outlet above but uses the Z-Wave network protocol instead. It is installed in the garage to control the garden sprinkler system.
This low-cost Wi-Fi outlet was acquired for (auto shutoff) use with a non-auto shutoff coffee machine relocated to our vacation home. Wi-Fi was chosen because a hub is not used at that location.
This was a crowdsource purchase (see Firewalla below). The concept of the ability to eliminate the plug-in outlets plus the ability to change functionality by swapping “inserts” interested me. So I “backed” the project and ordered one with a Z-Wave insert.
When I received the product in the spring of 2019 there were problems. But I was all to work with the company to get the problems fixed. I installed it where the GE Zigbee Outlet had been. The area is now visibly improved.
This, along with the other sensors below, was purchased not long after getting the SmartThings Hub when Samsung put them on sale. It was originally deployed, with the Cree Connected Bulb above, for use in our master bedroom walk-in closet.
It has been redeployed to detect motion, and send an alert, in a certain part of our bedroom between a limited set of hours.
This is the current motion sensor in our walk-in closet which triggers the overhead Cree Connected Bulb on upon detection and off after five minutes of no motion.
There are four under each sink we have, plus one under our washing machine. An alarm going off when out of the home might not be heard by anyone.
Being immediately alerted on my phone makes these devices much more valuable than the traditional solution. Getting alerted in June 2019 led to the acquisition of one more in our kitchen. The original model was still available, but the listing noted a newer version at a considerably lower price.
My wife, now liking the benefits of Smart Home technology, asked me to install a light in a coat closet. This works similarly to how the Multipurpose Sensor is being used, but instead of waiting, the light is turned off when the door is closed.
This device can be used on windows and doors to detect whether open or closed as well as acceleration and temperature (the above sensors also report temperature). It can also be used on garage doors. It is being used with the Centralite Zigbee outlet to turn on floodlights in our garage triggered by detecting door action and turn off five minutes after no further action.
This thermostat was acquired when we replace our 30 plus-year-old central HVAC system in 2014. SmartThings does not support this thermostat. There is a community of developers that offer work they have done for themselves to integrate devices they own with the SmartThings system. It takes a bit of bit of tech know-how. I was able to integrate it with my SmartThings installation.
An alarm going off when out of the home might not be heard by anyone. Being immediately alerted on my phone makes these devices much more valuable than the traditional solution. I installed three at chosen locations as these communicate with each other and will speak which one detected a problem.
This is installed outside to monitor activity entering the courtyard in front of the entrance to our house. The SmartThings system can act as a security monitor. When all of us are out of the home (as determined by our smartphones’ location) the camera is activated. It is also activated overnight when we’re at home.
This very low cost but good quality camera is used inside our home and only activated when we are gone for an extended period. Sense refers to a package that turns the camera into a hub for its add-on motion detectors and door sensors (and additional smart home products).
This reports when the door has been left open for a certain amount of time and provides the ability to use its App to close the door. NOTE: The links are to the unit I purchased, but it is no longer available. Click here for the link to the upgraded replacement model which is quite different looking.
This is the most popular device for controlling home entertainment systems. I got it mainly to gain firsthand knowledge. I had issues with its integration with my entertainment systems and subsequent changes added voice remotes eliminating its use in my home.
This inexpensive streaming device with voice remote and Alexa was purchased for possible usage by my mother-in-law. That did not come to be, but I now take it along when traveling.
Several years ago I attached a mechanical timer to my WiFi router. Earlier routers I had allowed me to configure an automatic reboot of the router.
A router is essentially a special purpose computer, and like most computers, it is a good idea to reboot from time to time to keep things running smoothly. The mechanical timer was used to power cycle the router in the middle of the night because the newer one did not include the automatic reboot capability.
Many cable-based Internet Service Providers (what we use) offer a single “gateway” device that attaches to the cable and includes a WiFi router. I have a separate device that connects to the cable (a cable modem – the router connects to it).
When I came across this NetReset device, which is designed for those of us with both a cable modem and a router, it struck me as a good idea, so I got it and have been happy with it.
I have “backed” a few projects on the top crowdsourcing websites, Kickstarter and Indiegogo. This is not something I would recommend doing as many projects fail or take much longer than originally projected.
This is one project that has worked out well for me. I’m not a networking expert and the simplicity of its installation was appealing. Firewalla has an impressive array of capabilities but I only use the most basic.
I’m very happy that I got it because sometime ago my Internet Service Provider (Comcast/Xfinity) informed me that we had used 75% of our monthly data transfer allotment.
I looked at past usage and it was generally about 30%. We were involved in a study at the time which included having a camera inside our home (before we had our own).
My first thought was that this was the cause of the usage issue. I was assured that the camera should not be the cause. I turned to Firewalla to see if it would be able to help me figure it out, and lo and behold it did.